X-Bloks are designed to replace the original manufacturers chain tensioner pad.

These pads are made from a hard wearing rubber pro-longing the life-span of the pad.

They have the bottom surface moulded at about 45 degrees to help prevent it from snagging on rocks as you ride over them, which so commonly breaks the original chain tensioner.

To fit them you have to drill the original hole 1mm bigger so that the moulded mounting bolts will go through them, then you just need the one 8mm spanner to tighten into place.

You have a choice of four colours to match your trials bike.

X-STRAPS are the latest ratchet straps to hit the UK market.

These great straps have been designed to remove the hassle we all know too well with using ratchet straps!

No more tangled loose strapping!

No more jammed ratchet wheel!

No more difficult lever systems!

No more confusion!

These straps are just easy to use and tidy.

The Xstrap has a load rating of 350kg and the bottom hook can be removed to allow you to bolt the strap to the trailer or van through the mounting hole in the back plate.

To use - pull the hook out to the desired length, attach to both ends, press the red button in to take up the slack and then just ratchet. When finished just press the red button to release the tension, un-hook and then just press the red button to wind all the loose strap back in.

X-PRO

This is the latest item to come from X-Products. This new design of puncture repair kit is designed with safety in mind. The business end (the spike) removes by pushing the brass insert in allowing the top to turn and position inside the alloy body making it very safe from causing injury.

Also you can put the puncture strips inside the body as well, keeping it all neat and tidy.

You have a choice of three colour.